the types off welding that requires gas cylinders are
MIG/TIG welding which are pure argon as this is used as a shielding gas to protect the weld from the air atmosphere to stop the weld contaminating Argon is usually used in TIG & CO2 & argon mix used in MIG. With MMA (Manual metal arc welding) the rod has already got a shielding gas which is the flux on the rod.
In gas welding Oxygen & Acetylene are used with the mix off these two gases in a welding torch creates a flame about 6000 degrees which when using different oxygen pressures can solder,braze,weld or even cut with a cutting torch attached
hope this helps :o)
[
More ]
[
Close ]
reply
0861788249
0861803284
